Ride on-board IMCA Modified rookie Chuck Costabile #48 around Ventura Raceway during his Heat Race. The track was very dry until right before the modifieds went on and they drenched the track. The car was not set-up for it so Chuck took it easy and didn’t push the car to hard….

“Virtual Car Show” …featuring “Night Eyes”… a beautiful ’60s Mustang fastback Resto-Mod, with a 1986 5.0 liter 302 roller motor that has been bored & stroked to 331ci. …and with a bit of attention focused on the sweet looking Cow-Girl at the end of the clip… she actually was wearing a big ‘ole DODGE belt buckle, LOL!!! …my kind of girl right there! Produced by John (Trae) King @ nedaCFilms with background beats produced by Rick Clarke (aka Rickvanman) For more MUST…

On Monday May 7 2012, we went to a car race meeting at Eastbourne Speedway, Arlington in East Sussex near Brighton, south of London, England. There were Rookie Rods (modified Novas), 1300cc stock cars and big vans, buses, ambulances and ice cream vans! It was total and utter carnage, especially when the big vans were on track as they kept smashing each other up, in fact one of the race heats turned into a demolition derby with head on collisions and some really badly damaged vehicles! Lots of ma…

On Monday May 7 2012, we went to a race meeting at Eastbourne Speedway, Arlington near Brighton. There were Rookie Rods (modified Novas), 1300cc stock cars and big vans, buses, ambulances and ice cream vans! It was total and utter carnage, especially the big vans as they kept smashing each other up. Some massive head on crashes and accidents, no serious injuries though! This video shows a few laps from one of the heats….

Highlights of the 12 lap Pick-A-Part Factory Stock road race from Perris Auto Speedway on May 5th, 2012. Brought to you by the AMSOIL Oil Twins….

I wanted to follow my own car but I selected the 13 car by mistake LOL…

Highlights of the 20 lap Pick-A-Part Factory Stock main event from Perris Auto Speedway on April 14th, 2012. Brought to you by the AMSOIL Oil Twins….

“Virtual Car Show” …featuring “Night Eyes”… a beautiful ’60s Mustang fastback Resto-Mod, with a 1986 5.0 liter 302 roller motor that has been bored & stroked to 331ci. …and with a bit of attention focused on the sweet looking Cow-Girl at the end of the clip… she actually was wearing a big ‘ole DODGE belt buckle, LOL!!! …my kind of girl right there! Produced by John (Trae) King @ nedaCFilms with background beats produced by Rick Clarke (aka Rickvanman) For more MUST…

Paige shows us how to measure for tapered roller bearing and ball bearing replacement. She gives us an overview of Surperior Bearing and Supply, QJZ Bearing and Kdeer Bearings race car bearings, ceramic bearings, specialty and industrial bearings. From Sprint Cars, Micro & Minis, Dirt Modified, Stock Car, Go Karts, Northeast Dirt racers to custom manufactured bearings, rod ends and oil seals, Paige gets us going….

THUNDERCARS STOCK CARS DIRT TRACK RACING…

Flamboro Speedway Memorial Night 2011, celebrating the 50th anniversary of stock car racing in Hamilton’s asphalt arena. Featuring Grisdale Late Models, Freedom Village Thunder Cars, Ponderosa Nature Resort Mini Stocks, and F4 Modifieds. August 20th, 2011. Hamilton, Ontario, Canada….

…an old clip (updated re-edit) of Bobby’s Mustang, right after the 342 Stroker build… out with the stock E7 headed 302 and in with the Canfield headed 342, and probably making in the 350hp range @ the wheels and 400hp @ the flywheel (give or take)… if you follow past videos of Bobby’s Mustang, you’ll see it going up against a tweaked 2004 SVT Cobra… and considering the Cobra was probably pushing damn near 500hp, Bobby’s Stroked Fox did pretty good, actually taking the Cobra through 1st a…

Highlights from Saturday’s PASSCAR Modified and Pick-A-Part Factory Stock main events from Perris Auto Speedway. Brought to you by Oil Twins AMSOIL….

This video shows you exactly what is in and how to use the Racers Edge Race Car Setup Program. It is a Microsoft Excel based software. It includes: Tire Temperature Averaging Program Scale Your Race Car Program Shock & Springs Program Tire Stagger Program This software packs a HUGE punch when it comes to saving setup information! Save all your setups on your computer and be able to recall them at anytime for reference. Good for NASCAR UMP IMCA Wissota USRA USMTS or any ot…

Paige gives us an overview of Surperior Bearing and Supply, QJZ Bearing and Kdeer Bearings race car bearings, rod ends, oil seals, OEM parts, ceramic bearings, specialty and industrial bearings. . From Sprint Cars, Micro & Minis, Dirt Modified, Stock Car, Go Karts, Northeast Dirt racers to custom manufactured bearings, rod ends and oil seals, Paige gets us going….

1/10 Stock (brushed) RC Drift Car HSP Flying Fish. 1800mah Ni-Mh Comment – Rate – Subscribe ! ! !…

Jamrock Speedway – 2wd Stock Buggy Test to Tweak Layout I finally got my buggy together to see how it handles the layout. The rhythm section will be replaced with a double this week and a couple of spots smoothed out before we begin conditioning the surface….

Jamrock Speedway – 2wd Stock Buggy Test to Tweak Layout – 2nd Run Got my buggy together to see how it handles the layout. The rhythm section will be replaced with a double this week and a couple of spots smoothed out before we begin conditioning the surface….

The track hasn’t been packed yet. This is the other truck I brought out to run the track to see what changes needed to be made still. This run was with my SC10 with a 17.5 motor. I don’t know why my phone didn’t focus. I take all of these videos with it….

Here’s an old clip (and updated re-edit) of Bobby’s Mustang, right after the Stroker build… out with the stock E7 headed 302 and in with the Canfield headed 342, and probably making in the 350hp range… if you follow past videos of Bobby’s Mustang, you’ll see it going up against a tweaked 2004 SVT Cobra… and considering the Cobra was probably pushing damn near 500hp, Bobby’s Stroked Fox did pretty good, actually taking the Cobra through 1st and 2nd, and ultimately losing by just a couple ca…

– Stock 13.5T boosted versus Modified 4.5T. Speeds are now insanely fast. Too fast for me, that’s why I let my 10 year old daughter do the driving. She qualified in 6th for both Stock 13.5T and Modified. This is only her second time to drive modified. The start of the video shows great racing and control among the drivers. First two laps of very close and fast racing with no bumping. So nice to watch clean racing. Porsha’s RC Cars: Sakura Zero (Stock) Motor: SpeedPassion 13.5T…

Mercedes Benz Mc Laren SLR – what a car Mercedes Benz Mc Laren SLR by Sievers – now thats ridiculous…

RC Cars Gathering – HPI Bajas Racing Stock and Modified…

Ford TE cortina speedway car in my shed after fitting a Falcon EL XR6 fuel injected 4 litre engine to race the Outlaw class at Herberton in Far North QLD. Seems all is good. Got some tidying up to do and should be ready for some track testing….

I got a win over some modified cars and qualified for the feature event. I am the #11 black and white car. (87 Gran Marquis) Enjoy!!!!…